Influence of incorporation of nanostructured silver vanadate decorated with silver nanoparticles on roughness, microhardness, and color change of pit and fissure sealants.

Objective: The aim of this study was to evaluate the roughness, hardness, and color change of pit and fissure sealants of two commercial brands (Fluroshield ™ and Ultraseal XT ™) incorporated with nanostructured silver vanadate nanomaterial decorated with silver nanoparticles (ß-AgVO3) in concentrations (0% - control, 2.5% and 5%). Material and methods: Two commercial brands Fluroshield TM and Ultraseal XT ™ were used to make the samples with dimensions of 6 × 6 × 4 mm. The control group was made according to the manufacturer's instructions and in the groups with the addition of ß-AgVO3, the nanomaterial was added proportionally by mass at percentages of 2.5% and 5%. Roughness properties were evaluated using a 3D Laser Confocal Microscope (n = 10), Knoop microhardness by Microdurometer (n = 10), and color change by Portable Color Spectrophotometer on the CIEDE2000 system (n = 10). Data were evaluated by one-way ANOVA with Bonferroni adjustment and Tukey's mean comparison test at a 5% significance level. Results: Ultraseal XT ™ sealant roughness showed a significant difference between concentrations with the highest mean for the 5% group (P = 0.010). Regarding the hardness, both sealants showed no significant difference between the groups. Fluroshield ™ sealant showed a significant difference in ΔE00 between the control-2.5% 24.93 (3.49) and control-5% 28.41 (2.58). Conclusion: It may be concluded that the incorporation of ß-AgVO3 influenced the increase in roughness for Ultraseal XT ™ pit and fissure sealant, did not interfere with the microhardness of both sealants, and promoted a change in the color of Fluroshield ™ sealant within clinically acceptable limits.

Effect of the association of coagulation/flocculation, hydrodynamic cavitation, ozonation and activated carbon in landfill leachate treatment system.

Mature landfill wastewater is a complex effluent due to its low biodegradability and high organic matter content. Currently, mature leachate is treated on-site or transported to wastewater treatment plants (WWTPs). Many WWTPs do not have the capacity to receive mature leachate due to its high organic load leading to an increase in the cost of transportation to treatment plants more adapted to this type of wastewater and the possibility of environmental impacts. Many techniques are used in the treatment of mature leachates, such as coagulation/flocculation, biological reactors, membranes, and advanced oxidative processes. However, the isolated application of these techniques does not achieve efficiency to meet environmental standards. In this regard, this work developed a compact system that combines coagulation and flocculation (1st Stage), hydrodynamic cavitation and ozonation (2nd Stage), and activated carbon polishing (3rd Stage) for the treatment of mature landfill leachate. The synergetic combination of physicochemical and advanced oxidative processes showed a chemical oxygen demand (COD) removal efficiency of over 90% in less than three hours of treatment using the bioflocculant PGα21Ca. Also, the almost absolute removal of apparent color and turbidity was achieved. The remaining CODs of the treated mature leachate were lower when compared to typical domestic sewage of large capitals (COD ~ 600 mg L-1), which allows the interconnection of the sanitary landfill to the urban sewage collection network after treatment in this proposed system. The results obtained with the compact system can help in the design of landfill leachate treatment plants, as well as in the treatment of urban and industrial effluents which contains different compounds of emerging concern and persistence in the environment.

Cytotoxicity and Elemental Release of Dental Acrylic Resin Modified with Silver and Vanadium Based Antimicrobial Nanomaterial / Citotoxicidade e Liberação Elementar de Resina Acrílica Odontológica Modificada com Nanomaterial Antimicrobiano a Base de Prata e Vanádio

The acrylic resin used for the prosthesis base accumulates biofilm, causing diseases such as stomatitis. The addition of some nanoparticles promotes antimicrobial action. This study incorporated the nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) to the acrylic resin by two methods and evaluated the cytotoxicity for human gingival fibroblasts (HGF) and the released silver and vanadium ions. The concentrations of 0.5, 1, 2.5, and 5% of AgVO3 was incorporated by vacuum spatulation and polymeric film. The vacuum spatulation was performed for 60 s using the Turbomix equipment, and the polymeric film was obtained from the polymer solubilization in chloroform, the film was subjected to a cryogenic grinding, and the powder obtained was manually mixed at the monomer. HGF cell viability was assessed after 24 hours, 7 and 14 days by the MTT assay. The release of silver (Ag) and vanadium (V) ions were quantified by inductively coupled plasma mass spectrometry after 30 days. Kruskal-Wallis and Dunn's test were applied (α = 0.05). The HGF viability was inversely proportional to the incubation time. Both incorporation techniques and the negative and positive control groups presented significant statistical differences (p<0.05). The experimental groups presented no statistical difference compared to the negative control (p>0.05), except the vacuum spatulation group with 5% of AgVO3 that showed greater viability than the negative control (p=0.013) in 24 hours. The release of Ag and V ions was proportional to the concentration of AgVO3 The 5% group presented a significant difference compared to the other groups (p<0.05). In conclusion, the acrylic resin with and without the AgVO3 incorporation had a small cytotoxic potential for HGF in 24 hours, with a lower viability in longer contact times; the release of Ag and V ions was proportional to the concentration of AgVO3, not influencing cell viability. (AU)

A resina acrílica utilizada para a base da prótese acumula biofilme, causando doenças como a estomatite. A adição de algumas nanopartículas promove ação antimicrobiana. Este estudo incorporou o vanadato de prata nanoestruturado decorado com nanopartículas de prata (AgVO3) à resina acrílica por dois métodos e avaliou a citotoxicidade para fibroblastos gengivais humanos (HGF) e os íons prata e vanádio liberados. As concentrações de 0,5%, 1%, 2,5% e 5% de AgVO3 foram incorporadas por espatulação a vácuo e filme polimérico. A espatulação a vácuo foi realizada por 60 s no equipamento Turbomix, e o filme polimérico foi obtido a partir da solubilização do polímero em clorofórmio, o filme foi submetido a uma moagem criogênica e o pó obtido foi misturado manualmente ao monômero. A viabilidade celular de HGF foi avaliada após 24 horas, 7 e 14 dias pelo ensaio de MTT. A liberação de íons prata (Ag) e vanádio (V) foi quantificada por espectrometria de massa com plasma indutivamente acoplado após 30 dias. Os testes de Kruskal-Wallis e Dunn foram aplicados (α=0,05). A viabilidade de HGF foi inversamente proporcional ao tempo de incubação. As técnicas de incorporação e os grupos controle negativo e positivo apresentaram diferença estatisticamente significante (p<0,05). Os grupos experimentais não apresentaram diferença estatística em relação ao controle negativo (p>0,05), exceto o grupo de espatulação a vácuo com 5% de AgVO3 que apresentou maior viabilidade que o controle negativo (p = 0,013) em 24 horas. A liberação de íons Ag e V foi proporcional à concentração de AgVO3. O grupo 5% apresentou diferença significativa em relação aos demais grupos (p <0,05). Em conclusão, a resina acrílica com e sem a incorporação de AgVO3 apresentou um pequeno potencial citotóxico para o HGF em 24 horas, com menor viabilidade nos tempos de maior contato, e a liberação de íons Ag e V foi proporcional à concentração de AgVO3, não influenciando na viabilidade celular. (AU)

Comparison of oral microbiome profile of polymers modified with silver and vanadium base nanomaterial by next-generation sequencing.

This study aimed to evaluate two methods of the incorporation of nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) into acrylic resin and characterize the profile of early and late microbial communities in class and family taxonomic level by pyrosequencing. The specimens were made by adding different concentrations of AgVO3 (1, 2.5, and 5%) to the heat-activated acrylic resin by two methods: vacuum spatulation (VS) and polymeric film (PF). A control group (0%) without AgVO3 was also obtained for both methods. After 24 h and 7 days of incubation in human saliva, biofilm samples were collected, DNA was extracted, and 16S rRNA genes were sequenced by the 454-Roche sequencing platform. Seventeen classes and 51 families of bacteria were identified. The abundance of Bacteroidia, Bacilli, Negativicutes, Fusobacteria and Betaproteobacteria classes decreased after 7 days of incubation, and Clostridia, Gammaproteobacteria, and unclassified bacteria increased. The Negativicutes and Betaproteobacteria classes were more abundant when the PF method was used, and Gammaproteobacteria was more abundant when VS was used. The incorporation of 5% AgVO3 promoted a reduction in the prevalence of Bacilli, Clostridia, Negativicutes, Betaproteobacteria, and unclassified bacteria, and increased Gammaproteobacteria. The addition of AgVO3 to acrylic resin altered the early and mature microbiome formed on the specimen surface, and the PF method presented a more favorable microbial profile than the VS method.

Lipid-core nanocapsules containing simvastatin improve the cognitive impairment induced by obesity and hypercholesterolemia in adult rats.

The development of cognitive impairment may be related to high levels of plasma cholesterol and obesity. Simvastatin (SV) and lovastatin (LV) are drugs that can potentially be used for the treatment of cognitive deficit. This study aimed to develop and characterize lipid-core nanocapsules (LNC) containing SV (SV-LNC) or LV (LV-LNC), evaluating the effects of SV-LNC in an animal model of cognitive deficit. The formulations SV-LNC and LV-LNC presented a particle average size around 200 nm, a low-polydispersity index, and negative zeta potential. Analysis of differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy showed that there is no reaction among LNC components: LV was crystallized in the suspensions, and SV was molecularly dispersed. The encapsulation efficiency of the SV was high (98.9 ± 1.4%), while that of the LV was low (21.5 ± 1.5%).Based on these results, SV-LNC was used in the preclinical studies. Animals fed with a hyperlipidic diet (HD) developed obesity, hypercholesterolemia, and cognitive impairment, which was corroborated by the brain lesions indicated by histological analysis of some of the animals that received the high-fat diet. We observed that free simvastatin (CS3) was able to reduce the enzymatic activity of pyruvate kinase, an important enzyme for brain energy homeostasis, without affecting the memory of the animals that received a standard diet. However, it failed to improve the cognitive damage caused by a diet high in cholesterol and saturated fats. On the other hand, when simvastatin is "camouflaged" in the lipid-core nanocapsules (HNS3), this cognitive impairment improves. Thus, SV-LNC is a promising alternative therapy for the treatment of cognitive impairment.

Effect of nanomaterial incorporation on the mechanical and microbiological properties of dental porcelain.

STATEMENT OF PROBLEM: Dental porcelain restorations are subject to biological failures related to secondary caries and periodontal disease leading to prosthesis replacement. PURPOSE: The purpose of this in vitro study was to explore the microbiological and mechanical properties of dental porcelain incorporated with different percentages of silver vanadate (ß-AgVO3) through microbiological analysis, roughness tests, and the Vickers microhardness test. MATERIAL AND METHODS: IPS InLine porcelain specimens were made by using a cylindrical Teflon matrix in the dimensions of 8×2 mm. For the control group, the porcelain was manipulated according to the manufacturer's instructions. The groups incorporating the nanomaterial were prepared with 2.5%, 5%, and 10% of ß-AgVO3, which was added proportionally by mass to the porcelain powder. In vitro microbiologic analysis, roughness tests, and the Vickers microhardness test were performed. RESULTS: Against Streptococcus mutans, the control group showed no inhibition halo (0 mm). All groups with AgVO3 showed a zone of inhibition, the highest for the group with 10% (30 mm) and then the groups with 2.5% (9 mm) and 5% (17 mm). For Vickers microhardness, no statistically significant difference (P<.05) was observed between the evaluated groups. The group with 10% of AgVO3 had the highest mean roughness and was statistically different (P<.001) from the other groups. CONCLUSIONS: Adding ß-AgVO3 to dental porcelain demonstrated antimicrobial effectiveness at all concentrations (2.5%, 5%, and 10%), with no effect on Vickers microhardness. The 10% group had higher roughness than the other groups.

Metabolic effects in the freshwater fish Geophagus iporangensis in response to single and combined exposure to graphene oxide and trace elements.

Graphene oxide (GO) is part of a new set of nanomaterials with particular characteristics related to its nanoscale size. Due to this feature, it presents high reactivity and other contaminants present in the environment could bind to them and affect its intrinsic toxicity. The metabolic effects of such nanomaterials and their combination with two common pollutants, zinc and cadmium, on the freshwater fish Geophagus iporangensis are analyzed. Moreover, metabolic rate and ammonia excretion were used as bioindicators to measure metabolic changes. Fishes were exposed for 24 h in filtered tap water to different concentrations of GO (0.5; 1.0; 2.0 and 4.0 mg L-1), Zn (0.5; 1.0; 2.0; 4.0 and 10.0 mg L-1) and Cd (0.1; 0.5; 1.0; 2.0 and 4.0 mg L-1). Combined effects were verified using the same concentrations of trace elements added to 1.0 mg L-1 of GO. Exposure to GO and Cd resulted in a decrease of metabolic rate in G. iporangensis, by about 30% compared to control means, in the highest concentration tested (4.0 mg L-1). However, zinc exposure in the highest concentration (10 mg L-1) raised metabolic rate to around three times that of the control group. Ammonia excretion was not affected by exposure to GO and Cd. In contrast, exposure to Zn at 10 mg L-1 raised the rate to around 47%. The combined exposure of GO and Zn intensified the effects of the trace element, inducing responses in both biomarkers at lower concentrations and demonstrating that the interaction between elements increases zinc's effects. The combination Cd + GO only affects metabolic rate. Thus, this metabolic rate alone reveals that combined exposure potentiates effects of trace elements on fish metabolism.

Endodontic Sealers Modified with Silver Vanadate: Antibacterial, Compositional, and Setting Time Evaluation.

The incorporation of nanoparticles into endodontic sealers aims at increasing antimicrobial activity of the original material. Aim. The aim of this study is to incorporate the nanostructured silver vanadate decorated with silver nanoparticles (AgVO3, at 2.5%, 5%, and 10%) into three endodontic sealers and evaluate the antibacterial activity of freshly sealers, surface topography and chemical composition, and setting time. Material and Methods. The AgVO3 was incorporated into AH Plus, Sealer 26, and Endomethasone N at concentrations 0%, 2.5%, 5%, and 10% (in mass). The antibacterial activity of freshly sealers was assessed by direct contact with Enterococcus faecalis and CFU/mL count (n=10), surface topography, and chemical composition were measured by SEM/EDS, and the setting time was measured by Gillmore needle (n=10). The Kruskal-Wallis and Dunn statistical tests were applied (α=0.05). Results. All groups of sealers evaluated inhibited E. faecalis (p>0.05). The incorporation of AgVO3 altered the atomic proportions between components of the endodontic sealers, and the percentage of silver (Ag) and vanadium (V) increased proportionally to the concentrations of AgVO3. Topography analysis showed differences in components distribution on the surface of the specimens. The sealers incorporated with AgVO3 of AH Plus presented a lower setting time than the control group (p<0.05). For Sealer 26 and Endomethasone N, the incorporation of AgVO3 increased the setting time in relation to control group (p<0.05). Conclusions. The modification of endodontic sealers by AgVO3 increased the atomic percentage of Ag and V proportionally to the concentration of the nanomaterial and changed the atomic percentage of the sealer components and setting times. It cannot be affirmed that the AgVO3 promote differences in the antimicrobial activity of freshly sealers, and further investigations of the antimicrobial activity of the set sealers should be carried out.

Co-exposure of graphene oxide with trace elements: Effects on acute ecotoxicity and routine metabolism in Palaemon pandaliformis (shrimp).

Graphene oxide (GO) has been evaluated for application in environmental remediation and pollution control strategies. However, the side effects caused by the interactions of GO with classical pollutants in aquatic environments are still largely unknown. In this work, the ecotoxicological effects of GO, cadmium, zinc and the interactions between GO and these trace elements (co-exposure) were evaluated through acute toxicity tests and routine metabolism (i.e., oxygen consumption and ammonia excretion) in Palaemon pandaliformis (shrimp). After 96 h of exposure, GO did not present acute ecotoxicity at concentrations up to 5.0 mg L-1. However, the association of GO with Cd or Zn increased the toxicity of these trace elements as demonstrated by the decrease in LC50 values. The 96 h LC50 of Cd associated with GO was 1.7 times less than the 96 h LC50 of Cd alone. Similarly, the 96 h LC50 of Zn associated with GO was 1.8 times less than the 96 h LC50 of Zn alone. Additionally, the co-exposure of GO with trace elements impaired the routine metabolism of P. pandaliformis. Finally, the GO potentiated the ecotoxicological effects of Cd and Zn in the shrimp model. Future research on this emerging nanomaterial should focus on its use and disposal in aquatic ecosystems.

In vitro immunotoxicological assessment of a potent microbicidal nanocomposite based on graphene oxide and silver nanoparticles.

Graphene oxide (GO) and silver nanoparticles (AgNPs) can be formed into a hybrid nanomaterial, known as GOAg nanocomposite, which presents high antibacterial activity. The successful translation of this nanomaterial into medical use depends on critical information about its toxicological profile. In keeping with a Safe-by-design approach, we evaluated the immunotoxicity of GOAg using J774 and primary murine macrophages. The interaction between GOAg and macrophages was investigated with a scanning electron microscope (SEM). High-throughput technologies were employed to evaluate cell viability, apoptosis/necrosis, mitochondrial depolarization and lipid peroxidation. The inflammogenicity of nanomaterials was predicted after quantification of the cytokines IL-1ß, TNF-α and IL-10 before and after stimulation with interferon-γ (IFN-γ). The ratio between CD80 and CD206 macrophage populations were also estimated. In addition, the production of nitric oxide (NO) was investigated. SEM surveys revealed the potential of GOAg to induce frustrated phagocytosis. GOAg induced a dose-dependent mitochondrial depolarization, apoptosis and lipid peroxidation to J774 macrophages. GOAg toxicity was not modified in an inflammatory microenvironment, but its toxicity was within the range of concentrations used in bacterial inactivation. GOAg did not induce primary macrophages to significantly produce inflammatory cytokines, and previous macrophage stimulation did not enhance GOAg inflammogenicity. Additionally, the pristine nanomaterials and GOAg do not shift macrophages polarization towards M1. Sublethal concentrations of GOAg did not impair macrophages NO production. Finally, we suggest options for improvement of GOAg nanocomposite in ways that may help minimize its possible adverse outcomes to human health.

Effects of multiwalled carbon nanotubes and carbofuran on metabolism in Astyanax ribeirae, a native species.

The study of the toxic effect of carbofuran and multiwalled carbon nanotubes (MWCNTs) on Astyanax ribeirae metabolism is of paramount importance due to the increasing use of this pesticide in agriculture and in the production of nanotubes within the material industry. This study aimed to evaluate the effects of carbofuran, MWCNT, and the combination of these compounds on specific oxygen consumption and excretion of ammonia in A. ribeirae. Therefore, 65 fish were divided into three groups of treatments at varying concentrations: carbofuran (0.01, 0.05, 0.1, and 0.5 mg/L), MWCNT (0.1, 0.25, 0.5, and 1.0 mg/L), and 0.5 mg/L of MWCNT added to carbofuran concentrations (0.01, 0.05, 0.1, and 0.5 mg/L). The average specific oxygen consumption in the groups exposed to carbofuran, compared to the control, increased 73.49% at the 0.01 mg/L concentration and decreased 63.86% and 91.57% with treatments of 0.1 and 0.5 mg/L, respectively. For groups exposed to the MWCNT, there was an 83.91% drop with the 1.0 mg/L treatment, and the carbofuran + MWCNT groups recorded a decrease of 71.09%, 92.77%, and 93.98% at concentrations of 0.05, 0.1, and 0.5 mg/L, respectively. In relation to specific ammonia excretion, in groups exposed to carbofuran compared to the control, there was an increase of 134.37% and 200% with the 0.1 and 0.5 mg/L treatments, respectively. The group exposed to carbofuran + MWCNT experienced a decrease of 60% and 80% with treatments of 0.1 mg/L carbofuran + 0.5 mg/L MWCNT and 0.5 mg/L carbofuran + 0.5 mg/L MWCNT, respectively. Therefore, it was concluded that carbofuran + MWCNT interact, increasing the effects in Astyanax sp.

Analysis of the oral microbiome on the surface of modified dental polymers.

OBJECTIVES: This study characterized the microbial diversity of formed biofilm on the surface of acrylic resins modified with nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) after incubation in human saliva. DESIGN: Resin specimens prepared with AgVO3 at concentrations 0%, 1%, 2.5%, and 5% by either vacuum mixing or polymer solubilization were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). After 24 h and 7 days of saliva incubation, biofilm samples were collected from the surface of the specimens. The 16S rDNA genes were amplified, sequenced with the 454-Roche next-generation sequencing platform and analyzed to identify the Operational Taxonomic Units at the genus or higher level. RESULTS: Significant differences in the dispersion pattern of the nanoparticles were observed among the two different methods of AgVO3 incorporation. In the microbiological analysis, a total of 103 genera and 7 more inclusive taxa, representing the phyla Bacteroidetes, Firmicutes and Proteobacteria were identified colonizing resin surfaces. The incorporation method of the AgVO3 had little to no significant effect on the microbiota of samples. Significant time and concentration-dependent responses to AgVO3 caused changes in the taxonomic profile at the phylum and genus level. CONCLUSIONS: The results show differences in relation to the microbial diversity of modified resins during the initial phase of biofilm maturation. The incorporation of AgVO3 seems to significantly affect the colonizing microbiota.

Nano Silver Vanadate AgVO3 : Synthesis, New Functionalities and Applications.

Silver vanadates have been widely investigated because of their many interesting properties and their potential use in several applications. In addition to this, a large number of groups have investigated silver vanadates in the form of nanostructures. Here, we address first the synthesis and properties of nanosilver vanadate. Different techniques, such as precipitation, thermal decomposition, hydrothermal treatment, and sol-gel, are among the methods that have been employed for the controlled synthesis of silver vanadate. The use of nanosilver vanadate for the development of novel electronic devices, catalysts, and antibacterial agents for industry and biomedical applications will then be discussed. In this sense, the present review highlights the major advances regarding the synthesis, properties and applications of nanostructured silver vanadates.

Elemental ion release and cytotoxicity of antimicrobial acrylic resins incorporated with nanomaterial.

OBJECTIVES: This study evaluated the release of ions and the cytotoxicity of acrylic resins incorporated with silver vanadate decorated with silver nanoparticles (AgVO3 ). BACKGROUND: The inhibition of the accumulation of microorganisms on the resins is critical in preventing diseases. However, the hypothesis is that the release of ions from the incorporation of AgVO3 may be important in biocompatibility. MATERIALS AND METHODS: Specimens of autopolymerising (AP) and heat-polymerising resin (HP) with AgVO3 were prepared and immersed in culture medium. The release of silver ions (Ag) and vanadium (V) was evaluated by mass spectrometry with inductively coupled plasma (ICP-MS) (n=9) and the cell viability of fibroblasts L929 by MTT (3-[4,5-dimethylthiazol- 2yl]-2,5-diphenyltetrazolium bromide) (n=12). The results were evaluated with analysis of variance (ANOVA), Tukey and Pearson correlation test (α=.05). RESULTS: The groups containing AgVO3 presented a difference in relation to the control (0%) regarding the release of Ag and V (P<.0001). All groups showed a reduction in L929 viability when compared with the cellular control (100%) (P<.0001). In comparison with the control resins for HP, a reduction in the metabolism of cells occurred starting at 2.5% and for AP at 5% (P<.0001). A positive correlation was found between the concentration of AgVO3 and the ion release, and a negative between the ion release and the cell viability. CONCLUSIONS: Significant numbers of Ag and V ions were released from resins with higher concentrations of AgVO3 , presenting cytotoxicity for cells, suggesting that the use of low concentrations is indicated to avoid risks to patients.

Histopathological Effects on Gills of Nile Tilapia (Oreochromis niloticus, Linnaeus, 1758) Exposed to Pb and Carbon Nanotubes.

The effect of heavy metal in fish has been the focus of extensive research for many years. However, the combined effect of heavy metals and nanomaterials is still a new subject that needs to be studied. The aim of this study was to examine histopathologic alterations in the gills of Nile tilapia (Oreochromis niloticus) to determine possible effects of lead (Pb), carbon nanotubes, and Pb+carbon nanotubes on their histological integrity, and if this biological system can be used as a tool for evaluating water quality in monitoring programs. For this, tilapia were exposed to Pb, carbon nanotubes and Pb+carbon nanotubes for 4 days. The main alterations observed were epithelial structure, hyperplasia and displacement of epithelial cells, and alterations of the structure and occurrence of aneurysms in the secondary lamella. The most severe alterations were related to the Pb+carbon nanotubes. We conclude that the oxidized multi-walled carbon nanotubes enhanced the acute lead toxicity in Nile tilapias. This work draws attention to the implications of carbon nanomaterials released in the aquatic environment and their interaction with classical pollutants.

Histopathological alterations in the gills of Nile tilapia exposed to carbofuran and multiwalled carbon nanotubes.

Carbofuran is a nematicide insecticide with a broad spectrum of action. Carbofuran has noxious effects in several species and has been banned in the USA and Europe; however, it is still used in Brazil. Aquatic organisms are not only exposed to pesticides but also to manufactured nanoparticles, and the potential interaction of these compounds therefore requires investigation. The aim of this study was to examine the histopathological alterations in the gills of Nile tilapia (Oreochromis niloticus) to determine possible effects of exposure to carbofuran, nitric acid-treated multiwalled carbon nanotubes (HNO3-MWCNTs) and the combination of carbofuran with nanotubes. Juvenile fish were exposed to different concentrations of carbofuran (0.1, 0.5, 2.0, 4.0 and 8.0mg/L), different concentrations of HNO3-MWCNTs (0.5, 1.0 and 2.0mg/L) or different concentrations of carbofuran (0.1, 0.5, 2.0, 4.0 and 8.0mg/L) with 1.0mg/L of HNO3-MWCNTs. After 24h of exposure, the animals were removed from the aquarium, the spinal cord was transversely sectioned, and the second gill arch was removed for histological evaluation. Common histological changes included dislocation of the epithelial cells, hyperplasia of the epithelial cells along the secondary lamellae, aneurism, and dilation and disarrangement of the capillaries. All the groups exposed to carbofuran demonstrated a dose-dependent correlation in the Histological Alteration Index; the values found for carbofuran and carbon nanotubes were up to 25% greater than for carbofuran alone. This result indicates an interaction between these toxicants, with enhanced ecotoxic effects. This work contributes to the understanding of the environmental impacts of nanomaterials on aquatic organisms, which is necessary for the sustainable development of nanotechnologies.

Evaluation of antibiofilm and mechanical properties of new nanocomposites based on acrylic resins and silver vanadate nanoparticles.

OBJECTIVE: The purpose of this study was evaluate, for the first time, the impact of incorporation of nanostructured silver vanadate (ß-AgVO3) in antibiofilm and mechanical properties of dental acrylic resins (poly(methyl methacrylate), PMMA). DESIGN: The ß-AgVO3 was synthesized and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, and microanalysis (SEM/EDS). Resins specimens were prepared with 0-10% wt.% ß-AgVO3 and characterized by SEM, XRD and optical microscopy. The antibiofim activity of the samples against Candida albicans and Streptococcus mutans was investigated by XTT reduction test, colony-forming units (CFUs), and confocal laser scanning microscopy (CLSM). The flexural strength, hardness, and surface roughness of the samples containing ß-AgVO3 were compared with the pure PMMA matrix. RESULTS: The incorporation of 10% ß-AgVO3 significantly reduced the metabolic activity of C. albicans and S. mutans (p<0.05). There was a reduction in microbial load (CFU/mL) of microorganisms for the different concentrations used (p<0.05), which was confirmed by confocal microscopy. The addition of ß-AgVO3 did not change the mechanical properties of hardness and surface roughness of the resins (p>0.05). However, flexural strength decreased with the addition of amounts greater than 1% (p<0.05). CONCLUSIONS: ß-AgVO3 additions in dental acrylic resin may have an impact on inhibition of biofilm of main microorganisms associated with dental prostheses. However, the viability of clinical use should be evaluated in function of changed promoted in some mechanical properties.

Comparative in vitro toxicity of a graphene oxide-silver nanocomposite and the pristine counterparts toward macrophages.

BACKGROUND: Graphene oxide (GO) is a highly oxidized graphene form with oxygen functional groups on its surface. GO is an excellent platform to support and stabilize silver nanoparticles (AgNP), which gives rise to the graphene oxide-silver nanoparticle (GOAg) nanocomposite. Understanding how this nanocomposite interacts with cells is a toxicological challenge of great importance for future biomedical applications, and macrophage cells can provide information concerning the biocompatibility of these nanomaterials. The cytotoxicity of the GOAg nanocomposite, pristine GO, and pristine AgNP was compared toward two representative murine macrophages: a tumoral lineage (J774) and peritoneal macrophages collected from Balb/c mouse. The production of reactive oxygen species (ROS) by J774 macrophages was also monitored. We investigated the internalization of nanomaterials by transmission electron microscopy (TEM). The quantification of internalized silver was carried out by inductively coupled plasma mass spectrometry (ICP-MS). Nanomaterial stability in the cell media was investigated overtime by visual observation, inductively coupled plasma optical emission spectrometry (ICP OES), and dynamic light scattering (DLS). RESULTS: The GOAg nanocomposite was more toxic than pristine GO and pristine AgNP for both macrophages, and it significantly induced more ROS production compared to pristine AgNP. TEM analysis showed that GOAg was internalized by tumoral J774 macrophages. However, macrophages internalized approximately 60 % less GOAg than did pristine AgNP. The images also showed the degradation of nanocomposite inside cells. CONCLUSIONS: Although the GOAg nanocomposite was less internalized by the macrophage cells, it was more toxic than the pristine counterparts and induced remarkable oxidative stress. Our findings strongly reveal a synergistic toxicity effect of the GOAg nanocomposite. The toxicity and fate of nanocomposites in cells are some of the major concerns in the development of novel biocompatible materials and must be carefully evaluated.

Graphene oxide-silver nanocomposite as a promising biocidal agent against methicillin-resistant Staphylococcus aureus.

BACKGROUND: Methicillin-resistant Staphylococcus aureus (MRSA) has been responsible for serious hospital infections worldwide. Nanomaterials are an alternative to conventional antibiotic compounds, because bacteria are unlikely to develop microbial resistance against nanomaterials. In the past decade, graphene oxide (GO) has emerged as a material that is often used to support and stabilize silver nanoparticles (AgNPs) for the preparation of novel antibacterial nanocomposites. In this work, we report the synthesis of the graphene-oxide silver nanocomposite (GO-Ag) and its antibacterial activity against relevant microorganisms in medicine. MATERIALS AND METHODS: GO-Ag nanocomposite was synthesized through the reduction of silver ions (Ag(+)) by sodium citrate in an aqueous GO dispersion, and was extensively characterized using ultraviolet-visible absorption spectroscopy, X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, and transmission electron microscopy. The antibacterial activity was evaluated by microdilution assays and time-kill experiments. The morphology of bacterial cells treated with GO-Ag was investigated via transmission electron microscopy. RESULTS: AgNPs were well distributed throughout GO sheets, with an average size of 9.4±2.8 nm. The GO-Ag nanocomposite exhibited an excellent antibacterial activity against methicillin-resistant S. aureus, Acinetobacter baumannii, Enterococcus faecalis, and Escherichia coli. All (100%) MRSA cells were inactivated after 4 hours of exposure to GO-Ag sheets. In addition, no toxicity was found for either pristine GO or bare AgNPs within the tested concentration range. Transmission electronic microscopy images offered insights into how GO-Ag nanosheets interacted with bacterial cells. CONCLUSION: Our results indicate that the GO-Ag nanocomposite is a promising antibacterial agent against common nosocomial bacteria, particularly antibiotic-resistant MRSA. Morphological injuries on MRSA cells revealed a likely loss of viability as a result of the direct contact between bacteria and the GO-Ag sheets.

Fabrication of transparent and ultraviolet shielding composite films based on graphene oxide and cellulose acetate.

Graphene oxide (GO) has been considered a promising filler material for building polymeric nanocomposites because of its excellent dispersibility and high surface area. In this work, we present the fabrication and characterization of transparent and ultraviolet (UV) shielding composite films based on GO and cellulose acetate (CA). GO sheets were found to be well-dispersed throughout the CA matrix, providing smooth and homogeneous composite films. Moreover, the GO sheets were completely embedded within the CA matrix and no presence of this nanomaterial was found at the surface. Nevertheless, CAGO composite films offered an improved high energy light-shielding capacity when compared to pristine CA films. Particularly for UVC irradiation, the CAGO film containing 0.50wt% GO displayed a UV-shielding capacity of 57%, combined with 79% optical transparency under visible light. These CAGO composite films can be potentially applied as transparent UV-protective coatings for packing biomedical, pharmaceutical, and food products.